Producing the finest .stl files since 2016. Our store is jam-packed with
pristine pre-supported files as well as completely SUPPORT-FREE files
that can be printed perfectly with FDM or SLA printers!
Print Settings for Tilescape
~ .1 mm layer resolution
(You may want to try .15 or .2 if you want to experiment)
~ Solid Layers
TOP: 6
BOTTOM: 4
SHELL: 1
~ Nozzle Diameter
.4
~ Retraction Distance
1.5 mm
~ Retraction Speed
30 mm/s
~ Infill
15%
(You may want to try 10% if you want to experiment)
~ Temperature
NOZZLE: 195
BED: 60
(this is dependent upon your filament but we only recommend Hatchbox and this is what
works for us)
~ Speed
60 - 80 mm/s
~ Bridge Settings
UNSUPPORTED AREA THRESHOLD: 50 sq. mm.
~ BRIDGING EXTRUSION MULTIPLIER: 100%
~ BRIDGING SPEED MULTIPLIER: 100%
(everything else is on 0)
Print Settings for Stouthearted Heroes on Ender 3
Hatchbox / Ender 3 Combo
~ Same settings as above but:
RETRACTION DISTANCE: 3.5mm
TEMPERATURE: 185
INFILL: 15-20% depending on size of miniature
Christina Benton
Co-Owner
Rocket Pig Games is a company born out of our family's love of role-playing and the necessity we found in a genre where so much was lacking. We wanted 3D printable terrain that was completely modular and spacious enough to fill with miniatures and props! We wanted to be able to build with a truly "fog of war" style when we needed to. This is why we created Tilescape and Tilescape 2.0 systems! We wanted miniatures that you could just print and immediately play with, without messing around with removing supports...so we created them...thousands of them! Enjoy!
We dedicate ouselves to the rescue of farm animals (especially pigs) and by supporting our company, you are supporting them. You are saving lives with every purchase you make from our website and patreons. Thank you!